HobbyKing
12 BLADE ALLOY DPS 90MM EDF UNIT - 6S 1620KV 2250WATT
| EDF Rotor Diameter | 90mm |
| Outer Diameter | 94mm |
| Construction | Alloy |
| Max RPM | 37,000 |
| Motor Type | 3674 1620kv |
| Max Power | 2,250W |
| Continuous Power | 2,100W |
| Max Voltage | 22.2v (6S) |
| Max Amps | 97A |
| Max Thrust | 3.1kg |
Specs:, Weight:, 601g (complete unit with connectors),
This is the new version of the 90mm Alloy Dynamic ...5 Reviews
HobbyKing
TURNIGY DOUBLE BOGIE W/BRAKES JETLINER STYLE FULL METAL SERVOLESS RETRACT SYSTEM (90MM 767 / 787)
| Actuator dimensions | 68 x 26 x 23mm |
| 102mm (oleo compressed | 91mm) |
| 91mm (oleo compressed | 82mm) |
| Main Gear Cant angle | -10 - +45 degrees |
| Max Model Weight | 7500g |
| Operating Voltage | 4.8v~6v |
| Weight | 750g |
Specs:, Mounting hole spacing:, 30mm centre to centre, Nose Leg length:, Main Leg length:, Wheels:, 55mm (Mains) 35mm (Nose Gear),
Full Metal Servoless Retract with sprung Oleo Legs. This High ...HobbyKing
BOEING P-26A PEASHOOTER 800MM - REPLACEMENT MOTOR
| Max current | 18Amps |
| Max Power | 200watts |
| Idle current | 0.8Amp |
| Resistance | 8.8mΩ |
| Weight | 54g |
| Suggested ESC | 20A |
| Cell count | 3s Lipoly |
| Bolt holes spacing | 17.2mm |
| Connector | 3.5Bullet-connector |
Kv:1200, Shaft Length:17, Bolt thread:3M,
Boeing P-26A Peashooter 800mm - Replacement Motor mmHobbyKing
HOBBYKING CLUB TRAINER 1265MM - REPLACEMENT MOTOR
| Max current | 18Amps |
| Max Power | 200watts |
| Idle current | 1.6A |
| Resistance | 45mΩ |
| Shaft Length | 40mm |
| Weight | 86.5g |
| Suggested ESC | 20A |
| Cell count | 3s Lipoly (Voltage |
| Bolt holes spacing | 20mm |
| Connector | 3.5Bullet-connector |
Kv:1000, Bolt thread:M4,
Hobbyking Club Trainer 1265mm - Replacement Motor )HobbyKing
PIONEER 1020MM - REPLACEMENT BRUSHLESS MOTOR
| Max current | 10.5A |
| Max Power | 116W |
| Idle current | 0.8A |
| Resistance | 8.8mΩ |
| Shaft | 17mm |
| Weight | 54g |
| Suggested ESC | 20A |
| Cell count | 3s Lipoly |
| Bolt holes spacing | 17.2mm |
Kv:1200, Bolt thread:M3, Connection:, 3.5mm Bullet-connector,
Pioneer 1020mm - Replacement Brushless Motor5 Reviews
HobbyKing
LA BELLE DAME 1180MM - BRUSHLESS MOTOR
| Max Power | 59W |
| Idle current | 1Amp |
| Resistance | 137mΩ |
| Shaft | 29.7mm |
| Weight | 48.5g |
| Suggested ESC | 10A |
| Cell count | 2s Lipoly |
| Bolt holes spacing | 17.2mm |
Kv:1400, Max current:8A, Bolt thread:M3, Connector: 2,
La Belle Dame 1180mm - Brushless Motor mm Bullet-connectorHobbyKing
TURNIGY TRACKSTAR 1/8TH SENSORED BRUSHLESS MOTOR 2400KV
| Size | 4270 |
| RPM/v | 2400 |
| Sensored | Yes |
| Max voltage | 15V (4S) |
| Max Current | 160A |
| Max Watts | 2300W |
| Resistance | 0.0048ohm |
| Shaft Size | 5mm |
| Can Diameter | 42mm |
| Can Length | 70mm |
| Weight | 329g |
Features:, • Sensor-Based for Excellent Torque and Low-Speed Driveability, *Note:, Sensor cable included, Specs:, Poles:4,
The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at ...HobbyKing
WOODEN TRANSMITTER TRAY W/NECK STRAP (GREAT FOR FPV)
| Tray Outer Dimensions | 266x240x62mm |
| Mounting Plate Dimensions | 140x100mm |
| Weight | 265g |
Specs:, Tray Inner Dimensions:, 190x165x55mm (MAX transmitter size),
This wooden transmitter tray is constructed from light ply and ...5 Reviews
HobbyKing
JC120 EVO GAS ENGINE VERSION 2 W/CD-IGNITION 120CC/12.5HP @ 8,000RPM
| Bore/Stroke | 45 x 38 (x2) |
| Piston displacement | 120cc |
| Max. power | 12.5HP/8000rpm |
| Min. idle rotating speed | 1100rpm |
| Rotate Speed | 1,100rpm-8,000rpm |
| Spark plug | CM-6 style (x2) |
| Length from mount to propeller boss | 165mm |
| Mount Holes | 70mm x 80mm |
| Height from Crank Centerline to Carb Top | 120mm |
| Width (Spark Plug to Spark Plug) | 281mm |
Engine type:, Twin cylinder, 2-stroke, air-cooled, Carburetor:, Walbro choke type/diaphragm carburetor, Start mode:, Anticlockwise Push Prop Start, Weight:, 2620g (Complete except Ignition + 176g, Exhaust + 104g x 2 ),
JC120 Gas engine w/CD-Ignition 120cc/12.5hp @ 8,000rpm, nicely made, good ...5 Reviews
HobbyKing
DJ-80CC GAS ENGINE VERSION 2 W/ CD-IGNITION 8.2HP
| Bore x stroke | 52 x 38mm |
| Piston displacement | 80cc |
| Max. power | 8.2HP/8,000rpm |
| Min. idle rotating speed | 1200rpm |
| Rotate Speed | 1,200rpm-9,000rpm |
| Spark plug | NGK CM-6 style |
| Prop Range | 23x10~26x8 |
Specification:, Carburetor:, Walbro choke type/diaphragm, Start mode:, Anticlockwise Push Prop Start, Weight:, 1795g (without ignition or muffler),
DJ-80cc Gas engine w/ CD-Ignition 8.2HP, a nice quality and ...HobbyKing
JC60 EVO GAS ENGINE W/CD-IGNITION 60CC/6HP @ 7,400RPM
| Bore/Stroke | 45 x 38 |
| Piston displacement | 60cc |
| Max. power | 6HP/7,400rpm |
| Min. idle rotating speed | 1900rpm |
| Rotate Speed | 1,700rpm-9,000rpm |
| Spark plug | CM-6 style |
| Length from stand off to propeller boss | 169mm |
| Stand 0ff | 70mm |
| Mount Holes | 60mm x 86mm |
| Height from Crank Centerline to Spark Plug Tip | 137mm |
Engine type:, single cylinder, 2-stroke, air-cooled, Carburetor:, Walbro choke type/diaphragm carburetor, Start mode:, Anticlockwise Push Prop Start, Weight:, 1440g (Complete except Ignition + 120g, Exhaust + 100g ),
JC60 Gas engine w/CD-Ignition 60cc/6hp @ 7,400rpm, nicely made, good ...5 Reviews
HobbyKing
TURNIGY FULL METAL SERVOLESS RETRACTS WITH OLEO LEGS (TRICYCLE, BAE HAWK TYPE)
| Pin size | 3mm |
| Wheels | 24mm |
| Tires | 45mm |
| Max Model Weight | 3kg |
| Operating Voltage | 4.8v~6v |
Weight:, 60g each (Mains) 69g (Nose unit),
Full Metal Servoless Retracts with Steerable Nose Assembly and Oleo ...HobbyKing
TURNIGY FULL METAL SERVOLESS 90 DEGREE RETRACTS W/STEERABLE NOSE ASSEMBLY (8MM PIN)
| Pin size | 8mm |
| Max Model Weight | 15kg |
| Operating Voltage | 4.8v~7.4v |
Weight:, Nose unit (125g), wing units (121g each),
Full Metal Servoless Retract Set w/Steerable Nose Assembly - High ...HobbyKing
TURNIGY DOUBLE BOGIE JETLINER STYLE FULL METAL SERVOLESS RETRACT SYSTEM (90MM 767 / 787)
| Actuator dimensions | 68 x 26 x 23mm |
| 102mm (oleo compressed | 91mm) |
| 91mm (oleo compressed | 82mm) |
| Main Gear Cant angle | -10 - +45 degrees |
| Max Model Weight | 7500g |
| Operating Voltage | 4.8v~6v |
| Weight | 700g |
Specs:, Mounting hole spacing:, 30mm centre to centre, Nose Leg length:, Main Leg length:, Wheels:, 55mm (Mains) 35mm (Nose Gear),
Full Metal Servoless Retract with sprung Oleo Legs. This High ...HobbyKing
TURNIGY FULL METAL SERVOLESS RETRACT WITH 190MM OLEO LEGS (PAIR)
| Pin size | 5mm |
| Weight | 295g |
| Max Model Weight | 7000g |
| Operating Voltage | 5v~6v |
| Axle | 4mm |
5 Reviews